中文   |   English   |        
Home > Contact Us > Contact Us

Products

 

 

  • Name:RECONNAISSANCE MICRO ROBOT
  • Model:RD-MD1001
  • Features:

    Due to the small size, powerful two-wheel drive resulting in no turning radius and good off-road performance of the caterpillar track, the robot can enter into any a tiny space for inspection, or enter a hostile or hazardous environment for tactical reconnaissance, by remote-controlling. The reconnaissance micro robot is easy to use, not requiring specialized training to deploy. The reconnaissance micro robot has been engineered to be the most dependable member of your team.

  • Application:
    .
    ◆Vehicle Undercarriage
    ◆Counter Terrorism
    ◆Breach
    ◆Narcotics Raids
    ◆Hostage Rescue
    ◆High Risk Warrant Service
    ◆Barricaded Suspects
    ◆VIP/Dignitary Protection
    ◆Jail Riots
    ◆Search & Rescue
    ◆Inspection
  • SPECIFICATION:
    .
  • ◆The rubber belt track robot has very good climbing and off-road performance due to the two-wheel drive with two high-power DC motors. It has no turning radius, especially important to inspection in a tiny space, and it can climb a slope as large as 45°.
    • ◆Three cruising speeds from 0.15m/s to 1m/s are remote-controlled.
    • ◆Three 520-line HD cameras are located in the front, rear and top of the robot, respectively, switched by remote-control. Each camera can use invisible infrared LEDs as the illuminating source when in the dark environment.
    • ◆The robot has a high-sensitivity microphone which can be used to monitor audio signals in real-time.
    • The transmission distance of the remote-controlling signal and audio-video signal is from 50m to 500m, depended on the environment.
    • ◆Built–in rechargeable lithium-ion battery can power the robot with the run-time of 4 Hours.
    • ◆8in TFT LCD for video display and operations.
    • ◆The functions of the video operations are various, including real-time monitoring, photograph, recording, slow-motion, et al, and the results can be saved in a built–in SD card (4G/8G/16G) which can be accessed easily by a computer via the USB2.0 connector.
    • ◆The size of the robot

    310mm (front to back)*260mm* 99mm (height)
    Ground clearance: 21mm

    • ◆The size of handheld remote controller

    376mm*236mm*34mm

    • ◆Environment of operation

    Operating Temp:  -20ºC - +60ºC.
    Humidity:      5% - 95%.